AMG to MGA (Australia):

• This module handles conversions between the Australian AGD datum and GDA datum using parameters or NTv2 Grids. That is, it can convert between AMG/ISG co-ordinates and the new MGA co-ordinates. The Survey module includes this functionality but the AMG to MGA module may also be purchased separately.

Subdivision (Estate) Lots:

• With this module, users can create and label subdivision (estate) lots. Again, this functionality is included in the Survey module but may also be purchased separately.

DXF/DWG Input-Output:

• The DWG/DXF module will read and write DWG or DXF files up to and including ACAD 2000i and IntelliCAD.
• The reader recognises most AutoCAD entities, including blocks, and makes appropriate interpretation in terms of 12d Model elements.
• The DWG/DXF output module writes out plots and three dimensional data, creating ACAD blocks for 12d symbols. 12d Model triangles are written out as coloured faces so that they can be used in CAD packages for rendering.

Eagle Input-Output:

• The Eagle Binary input/output module is used to read specific information from an Eagle binary model and to write out plots, three dimensional data and triangles directly to Eagle models.

Genio Input-Output:

• The Genio input/output module is used to read and write Moss (MX) GENIO data files.
• The Genio reader recognises the two default Genio input formats (Versions 6 and 7) and the Genio options 001 and 003 used for format variations.
• Moss free format (using commas and the “field-number =“ syntax) is allowed.
• 2d, 3d, 4d, 6d, and G Strings are recognised (with names preserved) as well as triangulations.
• Genio models can be read directly into 12d Model models, or the genio data can be mapped with users defined models, colours, breakline type and linestyles.

Microstation Input/Output:

• The Microstation input/output module is used to read specific information from a Microstation .dgn file and to write out plots, three dimensional data and triangles directly to Microstation .dgn files.

Geocomp Input:

• The Geocomp reader reads and interprets the data contained in the Geocomp points and strings files. 12d Model macros are also provided to read Geocomp lot files. Points, lines and arcs can be written out to Geocomp points and strings files.

CivilCAD Input:

• The Civilcad reader reads and interprets the data contained in the Civilcad ascii file format.
• Reading both Version 4 and Version 5 Civilcad ascii formats is supported.
• Points, lines and arcs can be written out to Civilcad v5 ascii.